Proven Dutch monorail technology, applied to dipping lines for the first time: a chain that moves in every direction, hangs in light portals without a heavy frame, and puts your complete production line at floor level, right in front of you.
The chain is the heart of every dipping line
The chain is actually the most important part of the dipping line. It carries every former, through every station, hour after hour, and its design determines what your factory building has to look like.
Dutch Dipping Technologies uses the latest chain model, built into a cassette. The technology itself is proven Dutch monorail engineering, developed by another Dutch company for other industries. Dutch Dipping Technologies is the first to apply it to dipping machines: a first in the dipping world.
The conventional tower line
In a conventional dipping line, for example for condoms, a continuous chain runs through a tall frame over several levels. The process stations are placed at different heights inside that structure.
The chain is guided over a large number of sprockets and return wheels. This causes a lot of mechanical resistance. And because of the weight of the chain, the hangers and the glass formers, a powerful drive is needed.
The biggest drawback is access. Inspection, maintenance and repairs are often difficult, because the stations sit at different heights and inside the frame.
The second drawback is flexibility. The whole machine is built as one compact construction, and the positions of the stations are largely fixed. Changing the process, such as adjusting dipping times, replacing tanks or adding extra stations, is therefore hard to do.
To be fair, the tower line also has clear advantages. Because the stations are stacked, it needs considerably less factory floor area: it makes full use of the height of the building. And because it is one compact construction, it can be assembled at the customer's site more quickly.
Bends in every direction: that is the whole secret
A conventional dipping chain is like a sheet of paper: you can fold it up or down, but only along one axis. The chain climbs and descends in a single flat plane; it cannot turn left or right. So the whole machine becomes one tall, rigid wall of steel.
The Monorail chain is different. Its links pivot in every direction: up, down, left, right and back again. Over a stretch of roughly three metres it can even make a controlled twist, so products such as gloves can be turned during the process. Your line is no longer a wall. It is a route in three dimensions, planned around your floor, your corners and your building.
And because the cassette carries and drives the chain itself, the heavy machine frame disappears completely. The Monorail simply hangs in light portals: the orange rail in the photo above. A smart drive inside the cassette is, of course, included.
The Dutch Dipping Monorail: proven Dutch monorail technology, applied to dipping lines for the first time by Dutch Dipping Technologies.
Why it changes your factory
Walk around your line, instead of climbing into it
Conventional dipping lines are built nine to twelve metres high, in an expensive purpose-built hall. When something needs attention at six metres, someone has to climb up into the machine to find it.
With the Monorail, the complete line, every station from dipping to curing, lies flat on a normal factory floor. You simply walk around your production line: full overview of the whole process, every detail at eye level, every part within reach.
Operators and maintenance engineers can walk around every station, for checking, adjusting, maintenance and repair. When a part or a complete station has to be replaced, this is much simpler than in a tall tower machine. The supply of latex and other process liquids can be placed right next to the station that uses it, which keeps the installation clear and makes operation and maintenance easier.
We are honest about the trade-off: a flat line uses more floor area than a tower, and assembling it on site takes longer. Not more difficult: simply more work. But what you get back is complete oversight, faster intervention, easier cleaning and maintenance, and a far cheaper building.
More floor area does not mean wasted space. It means planned space. The Monorail lets you design the route around your building. Corners, U-turns, a loop back: everything stays at working height, where the process steps happen.
The rail can turn left and right, make short bends, run back, and go up and down: it can follow almost any direction. Building columns and other obstacles are therefore normally no problem: the route is designed to run around them. That makes the Monorail just as suitable for existing factory buildings.
And the height of your building is not lost either. Vertical stretches are perfect for drying time: the product simply dries on the way up, no processing needed there. You can even make an opening in the ceiling, run the Monorail through it, and repeat the whole pattern on the next floor. One line, two levels, double the route, all in the same building.
The Monorail can also be installed on an upper floor, provided the floor construction is suitable for the load.
The Dutch Dipping Monorail: proven Dutch monorail technology, applied to dipping lines for the first time by Dutch Dipping Technologies.
Ready for tomorrow's process
One of the most important advantages of the Monorail is that you can change your production process later. Dipping times can be changed, tanks can be replaced, and stations can be arranged differently. If the process asks for it, the Monorail can even be extended to add an extra station. Other dipping methods or additional process steps can be added more easily too.
So the installation grows with your future production needs, without rebuilding the complete machine. In a conventional, compact tower construction, this flexibility is much harder to achieve.
What the Monorail brings you
A route in three dimensions: the chain bends up, down, left, right and back, and even twists over a few metres to turn products during the process
No heavy frame: the chain hangs in light portals; the cassette carries and drives it
Walk around your line: full overview of the whole process at eye level, no climbing to six metres to find a problem
Lower buildings: no expensive nine-to-twelve-metre factory hall required
Height used for drying: vertical stretches become drying time; through the ceiling, the pattern can repeat on a second floor
Easier maintenance: every station within reach at floor level; parts and complete stations are simple to replace
Flexible for the future: change dipping times, tanks or stations, or extend the rail for an extra station
Fits existing buildings: the route runs around columns and other obstacles
Our choice
Dutch Dipping Technologies chooses the Monorail because we are convinced that a production line that is easy to reach, clear to oversee and flexible brings important advantages in the long run. We do not choose the most compact construction, but a production line that is easier to operate, easier to maintain and easier to adapt to future wishes. This principle applies not only to condom lines, but to all our industrial dipping lines.
Since 1946, Dutch Dipping Technologies has been among the pioneers of chain dipping lines. The Monorail is the next step: proven Dutch monorail technology, applied to dipping lines for the first time.